
Service area
Decks, patios and walls in Arlington County and Alexandria
Arlington and Alexandria yards are small, and that changes everything about a project. We build decks, patios, retaining walls and fences here, and the design usually starts with setbacks, lot coverage and how materials reach the backyard. Arlington files through Permit Arlington; Alexandria is an independent city with its own Permit Center, so the two never share paperwork.
What makes building on an Arlington or Alexandria lot different?
Space. A standard R-6 lot in Arlington is 6,000 square feet, side yards are narrow, and many rear walls are brick veneer. A deck ledger cannot hang on veneer under the state's prescriptive deck rules, so on those houses the deck is usually a freestanding frame with its own beam and footings just off the wall. So custom deck building here starts at the side lot line, not with railings.
Access is the other difference. When the only way to the backyard is a narrow side yard, block, stone and lumber are often carried in by hand, which moves the price. Mature trees shade many of these yards, which means fewer sprinkler zones and a strong case for drip in the beds through irrigation upgrades. Alexandria adds soils: its deck checklist warns that marine clay or a steep grade may call for a design by a Virginia-licensed professional.
How do Arlington setbacks and lot coverage shape a deck or patio?
From the county's setback and lot coverage pages as of fall 2026. Confirm your district and figures with the zoning office.
| Item | What Arlington publishes | What it means for the design |
|---|---|---|
| Uncovered deck, stoop or stairs | May project 4 ft into a setback, but no closer than 5 ft to a side lot line | Draw the deck inside the 5 ft line first |
| Deck floor 4 ft or higher | Counts toward main building footprint and lot coverage | Elevations of all sides plus the coverage worksheet |
| Pergola | Counts toward lot coverage | Check the worksheet before adding one |
| Driveway and walkway | Driveways count toward coverage; walkways do not | A path may fit where a larger slab will not |
| R-6 district limits | 40% total lot coverage, 30% main building footprint | On a 6,000 sq ft lot, 2,400 and 1,800 sq ft |
A deck floor just under 4 ft at its lowest corner stays out of coverage, so we measure grade at every corner on the first visit.
How do permits work in Arlington County?
Arlington takes residential applications only online through Permit Arlington and treats a deck as an addition. Its permit page sets no deck height threshold of its own and points to the state code's exemptions, so ask the Permit Arlington Center at 703-228-3800 before counting on a low platform being exempt. Review is published as about 2 business days for a Residential Addition Express and about 10 for a Route Through, after roughly two days of processing. At the footing inspection, the ledger must already be attached to the house.
Fences and walls have their own path. The county's Fence or Retaining Wall permit covers any new or replacement fence and any standalone wall; walls retaining 3 feet or more at any point are inspected, and walls over 4 feet must be sealed by a structural engineer. Disturbing 2,500 square feet needs a land disturbance permit, and from 2,000 square feet the county wants a survey of the disturbed area and silt fence. Within 100 feet of a stream, wider on steep slopes, patios and walls also need RPA review. Our Arlington deck permit guide and permit guide go further.
How is the City of Alexandria different?
Alexandria is an independent city, so no county paperwork carries over. Its Department of Code Administration and Permit Center run applications through the city's own APEX system, reachable at 703.746.4200. The city lists decks under residential permits, gives one and two family projects a plan review time frame of 10 business days unless they qualify for walk-through service, and names decks among the walk-through examples.
The city's deck checklist, revised June 2023, asks for the city's own Typical Deck Details where the deck follows them, a dimensioned house location plat, and a letter notifying the neighbor if the deck comes within 5 feet of the property line. For walls the city publishes two numbers: its permit page lists walls holding 2 feet or more of soil, while its 2022 checklist starts at more than 3 feet, so ask which applies. Walls from 3 to 6 feet need a stamped engineer's design. Houses in historic districts typically also need Board of Architectural Review approval. Our wall permit article compares it with the counties.
Which Arlington and Alexandria neighborhoods do we serve?
We work across both, and in the City of Falls Church nearby. The lot, the district and the reviewer change.
Smaller-lot Arlington districts
R-5 and R-6 neighborhoods of brick colonials, Cape Cods and bungalows, with veneer rear walls, detached garages already counting toward coverage, and narrow side yards.
Larger, sloped Arlington lots
R-10 and R-20 lots tend to be bigger with real slope, so a deck floor often passes 4 feet at the low corner and needs elevation drawings.
Arlington historic districts
A deck application must include the stamped Certificate of Appropriateness from the Historical Affairs and Landmark Review Board, whose calendar sets the schedule.
Townhouses and condominiums
In a condominium the deck may sit on a limited common element the association controls, so its approval comes before the county drawings.
City of Alexandria
Its own Permit Center and deck details, Board of Architectural Review approval in historic districts, and soils reports where problem soils call for one.
City of Falls Church
Also an independent city with its own permit office, so county paperwork does not apply there.
Which services suit small Arlington and Alexandria yards?
What to plan for with each on a tight lot.
Custom decks
Usually freestanding on brick veneer houses, held inside the 5 foot side line, and kept under 4 feet where coverage is tight.
Pergolas
Shade without a roof, but a pergola counts toward Arlington lot coverage, so the worksheet comes before the design.
Paver patios
Arlington's permit pages set no patio rule, but a patio counts toward land disturbance and needs RPA review near a stream.
Retaining walls
Arlington permits every standalone wall and seals walls over 4 feet; Alexandria wants a stamped design from 3 to 6 feet.
Fence installation
Any standalone new or replacement fence in Arlington needs a permit, while Fairfax and Prince William exempt most fences from a building permit.
Common questions
Does a deck count toward lot coverage in Arlington?
Only when its floor is 4 feet or more above finished grade. At that height an attached deck counts toward both total lot coverage and the main building footprint, and the application needs elevation drawings and the coverage worksheet. A floor below 4 feet does not count, which is why the grade at the lowest corner matters so much.
Do I need a permit to replace a fence in Arlington?
Yes. Arlington requires its Fence or Retaining Wall permit for any new or replacement fence that is not part of a larger project. That is stricter than Fairfax and Prince William, where fences are generally exempt from a building permit apart from pool barriers. See our fence installation page for how we plan the job.
My house is in Alexandria. Can I use Arlington or Fairfax deck details?
No. Alexandria is an independent city with its own Department of Code Administration, its own APEX system and its own Typical Deck Details. Its checklist also asks for a neighbor notification letter when a deck comes within 5 feet of the property line. File with the city, not a county.
Related services

Custom Deck Building
Custom deck building is the design and construction of a new pressure-treated wood or composite deck sized to your house and yard.
Learn more
Pergolas
A pergola is an open-roof frame of posts, beams and rafters that shades a patio, deck or garden without enclosing it.
Learn more
Paver Patios
A paver patio is an outdoor floor of concrete, porcelain or natural-stone units laid over a compacted stone base instead of a poured slab.
Learn more
Fence Installation
Fence installation is building a new wood, vinyl, aluminum or composite fence on a residential lot.
Learn more
Let's talk about your yard.
Tell us what you have in mind. We will walk the property with you, explain your options plainly and put the scope and price in writing.
Serving Fairfax, Loudoun, Prince William and Arlington counties and the cities inside them. Check your address. Military, veterans, first responders, healthcare workers and teachers: ask about the Heroes Discount.